A metal bed frame that squeaks anytime you move, even slightly, is one of life’s most unpleasant things. If you’re a light sleeper, the noise alone may be enough to keep you from obtaining a good night’s rest. Squeaky beds may be caused by a number of factors, including the mattress, box springs, and bed frame. This article will assist anybody with a noisy metal bed frame in determining the source of the squeak and then provide advice on how to stop the squeaky metal bed frame.
Identifying the perpetrator
You may skip this part if you’re certain that your frame is the problem. It’s worth mentioning, though, that a bed may squeak for a variety of reasons, and even if it doesn’t have a metal frame, it will have metal components that can start squeaking out of nowhere. To repair a squeaky metal bed frame, you’ll need to remove all other pieces of the bed to have access to the complete bed frame, so examine each section as you take it apart.
A squeaky bed may be caused by a variety of factors, including mattresses, box springs, and even headboards. Remove each of these components from your bed and place them on the floor, lying or standing on them to apply pressure and hear whether it produces a noise. When you’re down to the metal frame, check if you can make it squeak so you can pinpoint where the noise is coming from.
How to make a noisy metal bed frame stop squeaking
It might be difficult to pinpoint the exact source of a squeaky frame, so you may need to try a few different solutions until you discover one that works. However, until you discover a permanent solution, these options should either remove or at least decrease the issue.
Lubricants, for starters.
Applying WD-40 or a similar lubricant to a noisy metal bed frame that has symptoms of corrosion or ageing, particularly on or around the joints, may solve the issue instantly. If your frame seems to be in good condition but you suspect the squeaking is coming from the joints, you should lubricate them regardless.
As metal furniture ages, it will rust or erode to some degree. If your bed frame is rather old, you should think about replacing it.
If you don’t have any WD40 on hand, there are a few DIY alternatives you may try. A temporary solution may be found in most forms of wax, including candle wax. Apply the wax to the afflicted area in the same manner as you would WD40. You’ll need multiple coats, and this is just a temporary solution. A professional-grade lubricant will give a more long-lasting and dependable solution.
2. Increase the cushioning
Metal bed frames might creak in rare circumstances due to firm mattresses. Harder mattresses absorb your motions more effectively than softer beds. When a firm mattress is used on a metal bed frame, the frame might creak if the user moves about too much on it. If this is the case, you may discover that you can’t duplicate the noise you’ve been hearing when you strip your bed down to the frame. This is because it is caused by the combination of the mattress and the bed.
If you like a firmer mattress, consider putting extra padding between your mattress and your bed frame. You can purchase foam bed padding for this reason, but you may first try using clothing or linens to see whether extra cushioning would be beneficial.
3. Tighten any slack joints.
Squeaky beds may also be caused by loose joints. If there are no apparent evidence of any of the joints being loose, don’t rule out the possibility that this is the reason. Tightening the bolts on any joints on most bed frames shouldn’t be difficult or need any special equipment. You might also try placing new washers between the metal frame and the bolt to minimise the stress on the bolt and prevent squeaking. The sounds you’re hearing might be caused by washers that are old or improperly installed.
4. Cover the frame’s feet with padding.
It’s possible that the squeaking sounds you’re hearing is coming from your bed frame’s feet rubbing against your floor rather than from the bed frame itself. Furniture pads are inexpensive and simple to install. Even if this doesn’t stop the squeaking, furniture pads may assist with a variety of other annoying sounds while also safeguarding your floor.
Is it true that metal bed frames creak more?
Squeaking should never occur in a bed that has been properly built and installed. A noisy frame isn’t an issue that only metal frames have. Metal components are often seen in foam beds as well. It’s not only metal components that squeak; dusty, unclean, rusted, or just old timber components may also squeak.
Cheaper beds, on the other hand, are more prone to squeaking and have more problems as they age because they are made to a lower standard or with inferior materials. There are several reasons why you should not cut corners when purchasing a bed or mattress, one of which is that inexpensive metal beds are more prone to squeak. Even if you can silence the squeaking for a moment, it will very certainly return in the future.
Endurance Beds provides a selection of custom metal beds made of wrought iron that are meant to endure. All of our beds are built to a high quality by skilled specialists.
Comments 1